RadioLink R9DS 2.4Ghz 9-Ch S.Bus Empfänger

RadioLink R9DS 2.4Ghz 9-Ch S.Bus Empfänger

This will work perfectly with RadioLink AT9 and AT10 Transmitter, please bind it before first use.

How to bind?
1. Please turn on your transmitter and select a memory slot
2. Power on the aircraft, then Press and Hold the very small black button on the side of the receiver, until the LED goes flashing, then release the button.
3. After a few seconds it will automatically bind with the transmitter, it's that simple.

RadioLink R9D Receiver Spec and Features :

• 2.4Ghz DSSS und FHSS Protocol
• RX voltage and signal strength telemetry, external sensor for EP, Temperature, RPM, GPS etc.
• S.BUS compatible
• All 9 channels only take 3ms to response in parallel
• 4096 resolution, stable servo and no rudder shaking issue
• Takes high voltage up to 10V
• Small design for convenient assembling and operating
• Channel : 9-Ch / CH9 is for S.BUS
• Max input voltage: 10V
• Current : 38-45 mA（Voltage input: 5V）
• Size: 43mm x 24mm x 15mm
• Weight : 11g
• Section precision 4096

Suitable for : RadioLink AT9 / AT10 Transmitter