Lynx Heck Servo DS-883 incl. Servohalterung Rot - 130X

Lynx Heck Servo DS-883 incl. Servohalterung Rot - 130X





Lynx Heli Innovations is always looking for a better way of doing things, introducing innovative solutions.

Lynx now can offer a dedicated rotative tail servo for your standard as upgraded 130X.

Our tail servo is a composition of standard servo component with special electronics and connector to work perfectly in the 130 X 3in1 boards but as well can work with std FBL system.

Lynx DS-883 is “the” rotative tail servo for your 130X.

In order to support you the ultimate combo pack, Lynx offer two p/n: LX0525 and LX0526 were we combine LX9000 – DS883 digital rotative tail servo with Lynx tail servo mount and a special CF reinforce plate.

In one single Lynx bag all the answer of your 130x tail need!

DS-883 SERVO FEATURES:

- Direct replacement for the standard 130X tail servo.
- Metal Gear Digital Precision Servo

- Input (V-in): 3.5 to 5 V

- Frequency: 450 Hz

- Neutral Point: 1500μs

- Speed: 0.08 sec / 60° at 3.5V

             0.07 sec / 60° at 5 V

- Stall Torque: 1.25 kgcm at 3.5V

                      1.60 kgcm at 5 V

- Dimension: 19.60 x 8.00 x 19.40 mm

- Weight including 160 mm cable connector: 5.25g

- Output Gear support: Radial bearing 4x7 W2

- Servo Arms: 4 type included (see extra pictures)

- Servo Case Material: Technopolymer base plastic.

SERVO SUPPORT TECHNICAL SPECIFICATIONS:

- Tail servo support material: Aluminum 7075-T6 – Red anodized finish

- Screw material: Carbon steel plated

- Assembled weight: 0.25g

PACKING LIST:

1 x Digital Precision MG rotative tail servo DS-883, with necessary servo arms and hardware.

2 x CNC 130X – Universal Micro Rotative tail servo support - Red

2 x M1.4x6 Pan Head screws

2 x M1.6x4 Pan Head screws

2 x Flat Washer 1.6

TIPS AND INFORMATION FO RTHE BEST PERFORMANCE:

Our test show that the best servo arms length is between 5.5 to 6.5 mm.

Start with 6.5 mm and set the servo travel like was with the linear servo, don’t try to increase that travel.

Start with -5  Tail Gyro setting and test your Heli tail.

In function of your test, you will adjust the tail gain for your need and Heli setting. If with all negative Tail Gyro setting you still have tail wag, move the servo arm length to 6 or 5.5 mm and restart the test.

Unfortunately is almost impossible for Lynx give you the best std value because too many are the factors that can influence the gain.